2.7GHz Spectrum Analyzer - 2.7GHz Spectrum Analyzer Importer, Manufacturer, Service Provider & Supplier, Pune, India

Product Code : 23

Product Specification

2.7GHz Spectrum Analyzer

The GSP-827 Spectrum Analyzer is a very handy instrument for RF measurement application, delivering a superior combination of easy-to-use design and exceptional price/performance value enclosed within a highly portable package. Covering 9kHz to 2.7GHz, the GSP-827 is designed to meet Production/Development test demands of RF products, as well as on-site Maintenance/ Installation of wireless communication systems.

FEATURES

Frequency Range: 9kHz ~2.7GHz
Input Range: -100dBm ~ +20dBm
Average Noise Floor: -100dBm
Power Measurements: ACPR/OCBW/CH Power
Split Window: Simultaneous Measurements in Two Separate Frequency Spans
10 Markers: Delta Mode, Peak Search, Peak Track
Trace Function: Dual-Trace Display, Peak Hold, Freeze, Average, Trace Math
Limit Line: Upper/Lower Limit with Pass/Fail Test
Trigger Function: Video/External
Clock/Calendar: Time/Date Stamp in Saved Data
Wide Range of External Reference Clock: 1MHz ~ 19.2MHz
100 Trace/State Memories with Date/Time Stamp and File Name
TG: 9kHz ~ 2.7GHz, -50dBm ~ 0dBm (Option)
EMI Filters (Option)
AC/DC/Battery Operation (Option)
Compact Size and Light Weight at 4.5kg

SPECIFICATIONS

FREQUENCY
Frequency Range	9kHz~2.7GHz
Aging Rate	Ã‚Â± 10ppm, 0~50Ã‚Â°C, 5ppm/yr
Span Range	2kHz ~ 2.5GHz in 1-2-5 sequence, full span, zero span
Phase Noise	-85dBc/Hz @1GHz 20kHz offset typical
Sweep Time Range	50ms~25.6s
RESOLUTION BANDWIDTH
RBW Range	3kHz, 30kHz, 300kHz, 4MHz
RBW Accuracy	15%
Video Bandwidth Range	10Hz ~ 1MHz in 1-3 steps
AMPLITUDE
Measurement Range	-100dBm ~ +20dBm: 1MHz~2.5GHz @ 3k RBW -95dBm ~ +20dBm: 2.5GHz~2.7GHz @ 3k RBW -75dBm ~ +20dBm: 150kHz~1MHz @ 3k RBW -65dBm ~ +20dBm: 50kHz~150kHz @ 3k RBW
Overload Protection	+30dBm, Ã‚Â±25VDC
Reference Level Range	-30dBm ~ +20dBm
Amplitude Display Range	75dB
Amplitude Accuracy	Ã‚Â±1.5dB @100MHz
Frequency Flatness	Ã‚Â±1.5dB
Amplitude Level Linearity	Ã‚Â±1.5dB over 70dB
DYNAMIC RANGE
Average Noise Floor	-100dBm: 1MHz~2.5GHz -95dBm: 2.5GHz~2.7GHz -75dBm: 150kHz~1MHz -65dBm: 50kHz~150kHz
Third Inter-Modulation	< -70dBc @-40dBm Input, 2MHz apart
Harmonic Distortion	< -60dBc @-40dBm Input
Non-Harmonic Spurious	< -60dB @typical down from Reference Level 150k~2.7GHz
DISPLAY SYSTEM
Display Device	640 x 480 high resolution graphical LCD, B&W
Display Function	Contrast, backlight ON/OFF, Invert screen split window : upper and lower
FUNCTIONS
Marker Mode	Normal and delta mode Number: Up to 10 in multi marker mode
Internal Memory	100 traces and setup for Save/Recall
Peak Search	To peak, to center , next peak, peak right, peak left and peak track
Trace Number	Number:2, tr A and B for display memory Functions: peak hold, average, freeze, math. Detect: sample, peak+, AVG 1/2/3, quasi-peak
Power Measurement	ACPR x 2, OCBW, Channel Power
Trigger	Functions: Video, External Mode: continuous, single Source: video, external (0~5V rising edge) Setting: Trigger delay, Trigger frequency
Limit Line	Number: 2, high and low Functions: Edit:Insert, Delect, Undo Pass/Fail
Calibration Signal	100MHz, -30dBm
CONNECTORS
RF Input	Type: N female, 50ÃŽÂ© nominal RF input VSWR: <1.5:1, @0dBm Reference Level
External Reference	Type: BNC female
Clock Input	1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2M
Reference Clock Output	Type: BNC female, 10MHz
DC Input	Jack : 5.5mm, 12V
INTERFACE
RS-232C	Sub-D 9-pin female
GPIB (Option)	Fully programmable with IEEE488.2 compliance
POWER SOURCE
	AC 100 ~ 240V, 48 ~ 63Hz
ACCESSORIES
	User manual x 1 Power cord x 1
DIMENSIONS & WEIGHT
	330(W) x 170(H) x 340(D) mm Approx. 4.5kg

Other Products in 'Spectrum Analyzer' category

RF & Spectrum Analyzer Training System

<< Back